For more information contact:
Contaminated Surplus Property
Appendix 5A: Asbestos-Containing Materials
See Identification below for a list of common materials that may contain asbestos.
Departments may offer asbestos-containing materials (ACMs) that are in good condition to Surplus Stores.
Departments are not required to remove ACM from items prior to surplusing. Examples include:
- Resilient floor covering
- Asphalt roofing
- Rigid exterior siding
- Boards known by the trade name transite
- Asbestos cement board used in acoustical panels and laboratory benches
The following list includes examples of common items which may include asbestos-containing materials (ACM):
- Acoustical material
- Bunsen burners
- Cabinets (fire resistant)
- Fireproofing material
- Gasketing (sheet and rope type)
- Gloves (autoclave, high temperature)
- Heating mantles and shields
- Hot plates
- Laboratory bench tops and fume hoods (interior transite panels)
- Ovens (industrial and laboratory)
- Safes (fire-resistant)
- Textured surfacing material
- Thermal system insulation (TSI), e.g., pipe insulation
- Water baths
- Wire mesh (only when visible imbedded ACM is present)
If the department suspects that an item may contain ACM, the department must attach a completed Item Evaluation form to the item.
The department must perform an initial visual evaluation to see if the item contains ACM (see Handling ACMs).
Removal and Disposal of ACM
The department is responsible for contacting the WSU asbestos crew for evaluation and all costs associated with removal and disposal of the ACM; telephone 509-335-9097 (see SPPM 5.22).
NOTE: Only employees certified as asbestos building inspectors in the state of Washington are allowed to remove ACM.
Notification of ACM
Surplus Stores must notify the potential purchaser of any ACM within the equipment prior to final sale (see Handling ACMs).